LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2010 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Module HVAC >> Service and Repair >> Front Blower Motor Power Module - Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Blower Motor Power Module - Installation






INSTALLATION






NOTE: LHD model shown. RHD model similar.

1. Position the blower motor power module (2) into the HVAC housing (4).
2. Install the two screws (3) that secure the blower motor power module to the HVAC housing. Tighten the screws to 2 Nm (17 in. lbs.).
3. Connect the two wire harness connectors (1) to the blower motor power module.
4. On LHD models, install the glove box into the instrument panel Instrument Panel Glove Box - Installation.
5. On RHD models, install the instrument panel silencer onto the passenger side of the instrument panel.
6. Reconnect the negative battery cable.

scientia non olet · About LEMON Manuals