LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2010 >> Commander 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Locks >> Power Locks >> Power Door Lock Switch >> Service and Repair >> Power Lock Switch - Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Lock Switch - Installation






INSTALLATION





1. Connect electrical harness connectors to switch.
2. Insert front end of switch into door trim panel opening. Press into place.
3. Connect battery negative cable.

scientia non olet · About LEMON Manuals