LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2010 >> Commander Limited, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Block >> FLEXPLATE >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Block: FLEXPLATE: Installation: Installation

Fig 1: Flexplate Retaining Bolt Removal & Tightening Sequence
GC0088080Courtesy of CHRYSLER LLC
  1. Position the flexplate onto the crankshaft and install the retaining bolts hand tight.
  2. Using the sequence shown in illustration, tighten the flexplate retaining bolts to 95 N.m (70 ft. lbs.).
  3. Install the transmission. Refer to Transmission and Transfer Case/Automatic - NAG1 - Installation .
scientia non olet · About LEMON Manuals