LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2010 >> Wrangler Mountain, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> COIL, Ignition, 3.8L >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

COIL, Ignition, 3.8L: Installation: Installation

Fig 1: Ignition Coil Pack 3.8L
GC0130773Courtesy of CHRYSLER LLC
  1. Install coil pack over mounting studs.
  2. Install two mounting nuts (2).
  3. Connect electrical connector (3) to ignition coil.
  4. Install six ignition cables (4) to ignition coil.
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals