SENSOR, Fuel Temperature: Removal: Removal

Fig 1: Identifying Quarter Turn Lock Tabs & Air Inlet Duct

Courtesy of CHRYSLER LLC

Remove the engine cover.
Remove air inlet duct (2).
Disconnect the negative battery cable.
Remove cooling fan assembly. Refer to FAN, Cooling, Removal .

Fig 2: Identifying Bolts & Heat Shield
Courtesy of CHRYSLER LLC
Remove bolts (1) and the heat shield (2).

Fig 3: Identifying Fuel Temperature Sensor Harness Connector
Courtesy of CHRYSLER LLC
Disconnect the fuel temperature sensor harness connector (2).
Remove the fuel temperature sensor (1).
Remove and discard sealing washer and O-ring.