LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2011 >> Grand Cherokee 2WD V6-3.6L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Keyless Starting System >> Testing and Inspection >> Initial Inspection and Diagnostic Overview
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initial Inspection and Diagnostic Overview






DIAGNOSIS AND TESTING

If the Keyless Go (KG) feature is inoperative, it may be caused by an invalid FOB with Integrated Key (FOBIK), or a FOBIK with a dead battery. Additionally if the Remote Keyless Entry (RKE) is inoperative, the KG will also be inoperative.

The message center dislplays the following messages when certain conditions are met.

- Key FOB Battery Low - Displayed when the battery in the FOBIK is low. At this point the Keyless Go function should still operate, but the battery should be replaced soon.
- Key FOB Not Detected - Displayed when a valid FOBIK could not be detected inside the vehicle
- Push Pedal + Button to Start - Displayed when one enters the vehicle.
- Service Keyless System - Displayed when there is a problem with the KGsystem.
- Vehicle Not in Park - Displayed when shutting off the vehicle while the transmission is not in the PARK position.

For further information, refer to the proper diagnostic information.