LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2011 >> Wrangler Sport, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Electronic Control Modules (Service Information)) >> Module, Heated Seat >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Heated Seat: Installation: Installation

WARNING: This page is about a different car, the 2011 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Properly align the Heated Seat Module (HSM) retaining tabs to the driver seat bottom pan, prior to engagement. Failure to follow these instructions may result in damage to the HSM.

Fig 1: Electrical Connectors & Heated Seat Module (HSM)
GC0147669Courtesy of CHRYSLER LLC
  1. Position the Heated Seat Module (HSM) (2) to the driver seat and engage the two outboard HSM retaining tabs (3) to the seat bottom pan (5). Make sure the retaining tabs are correctly engaged to the seat bottom pan.
  2. Engage the inboard HSM retaining tab (1). Make sure the retaining tab is fully engaged to the seat bottom pan.
  3. Connect the electrical connectors (4) to the HSM.
  4. Install the seat Refer to SEAT, FRONT, INSTALLATION or SEAT, INSTALLATION .
  5. Reconnect the negative battery cable.
  6. Verify proper heated seat system operation.
scientia non olet · About LEMON Manuals