LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Latitude, 2.4 B, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (Front Axle) >> Case Assembly, Differential >> Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Case Assembly, Differential: Assembly: Assembly

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pinion Mate Gear
GC0100682Courtesy of CHRYSLER GROUP, LLC
  1. Install differential side gears (2) and thrust washers.
  2. Install pinion mate gears (3) and thrust washers (1).
  3. Install pinion gear mate shaft.
    Fig 2: Pinion Mate Shaft Roll-Pin
    GC0100683Courtesy of CHRYSLER GROUP, LLC
  4. Align hole in the pinion gear mate shaft (2) with the hole in the differential case.
  5. Install the roll-pin (3) in the differential case with a hammer and punch (1). Peen the edge of the roll-pin hole in the differential case in two places 180° apart.
  6. Lubricate all differential components with gear lubricant.
  7. Install ring gear.
scientia non olet · About LEMON Manuals