Continuously Variable Transmission (CVT) (Service Information): Differential: Assembly: Assembly

Fig 1: Press Bearings To Carrier

Courtesy of CHRYSLER GROUP, LLC

1. Use Installer C-3716-A and Handle (special tool #C-4171, Driver Handle, Universal) to install the bearings onto the carrier (both sides).
   Fig 2: Side Gears

   Courtesy of CHRYSLER GROUP, LLC
2. Install the side gears (2) and shims (3) onto the carrier. Refer to Fig 2.
   Fig 3: Pinion Gear Shim

   Courtesy of CHRYSLER GROUP, LLC
3. Place the pinion gears (3) onto the side gears with the correct shims (1). Refer to Fig 3.
4. Roll into place.
   Fig 4: Pinion Shaft

   Courtesy of CHRYSLER GROUP, LLC
5. Install the pinion shaft (2). Refer to Fig 4.
   Fig 5: Pinion Shaft Roll Pin

   Courtesy of CHRYSLER GROUP, LLC
6. Use a new roll pin (3). Refer to Fig 5.
   Fig 6: Pin Punch AT Roll Pin

   Courtesy of CHRYSLER GROUP, LLC
7. Install the roll pin (3) using a pin punch (1). Refer to Fig 6.