Section 79 (Front Axle): Removal: Removal

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove both front halfshafts. Refer to REMOVAL and REMOVAL .
Remove front intermediate shaft assembly. Refer to REMOVAL or REMOVAL .
Remove front propeller shaft. Refer to REMOVAL .
Remove RH catalytic converter/exhaust pipe assembly. Refer to CONVERTER, CATALYTIC, REMOVAL .

Fig 1: Return Hose Routing Clips
Courtesy of CHRYSLER GROUP, LLC
Separate power steering return line (3) from cradle by unfastening clips (1). Refer to Fig 1.

Fig 2: Front Drive Axle Housing
Courtesy of CHRYSLER GROUP, LLC
Remove front axle housing support bracket (1). Refer to Fig 2.

Fig 3: Removing/Installing Front Axle
Courtesy of CHRYSLER GROUP, LLC
Remove seven front axle assembly-to-oil pan bolts. Remove axle assembly (1) from vehicle. Refer to Fig 3.