LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Grand Cherokee 2WD V8-5.7L >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Keyless Starting System >> Description and Operation >> Keyless Go - Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Go - Description





DESCRIPTION

KEYLESS GO SYSTEM

The Keyless Go (KG) system changes the state of the vehicle's ignition between the OFF, ACCESSORY, RUN, and START states using a momentary button rather than a conventional key.

The KG system includes the following major components, which are described in further detail elsewhere in this service information:

- FOB with Integrated Key (FOBIK) - Transponder Key - Description
- Passive Entry Antenna - Multiple Low Frequency (LF) antennas are located throughout the passenger compartment. Passive Entry Antenna - Description
- Passive Entry Module (PEM) - The module is located on the outboard end of the air conditioning and heater unit blower housing beneath the passenger side end of the instrument panel.Passive Entry Module - Description
- START/STOP button - Located on the instrument panel, inserted into the Wireless Ignition Node (WIN)Start/Stop Button - Description
- Wireless Ignition Node (WIN) - Located to the right of the steering column and is concealed beneath the instrument panel Wireless Ignition Node Receiver - Description