LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Boost Pressure: Installation: Installation

Fig 1: Intake Air Temperature Sensor/Boost Pressure Sensor, Fastener & Connector
GC0146601Courtesy of CHRYSLER GROUP, LLC
  1. Install the boost pressure sensor (2) and securely tighten fastener (3).
  2. Connect the boost pressure sensor harness connector (1).
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals