Power Window Switch - Removal

REMOVAL

FRONT





1. Disconnect and isolate the battery negative cable.
2. Using a suitable flat bladed tool, gently pry the switch (1) from the door trim panel.
3. Disconnect electrical harness connector's and remove switch.

REAR

NOTE: Some interior trim packages may make switch removal difficult by traditional means, and require interior trim panel removal to service the switch assembly.





1. Remove the rear door interior trim panel, Rear Door Trim Panel - Removal.
2. Pull the trim panel away far enough to access and disconnect the electrical connector.
3. Access the four clips (2) that secure the switch (1) to the trim panel from the back. Compress the clips and remove the switch.