Installation - PDC Assembly

Fig 1: Power Distribution Center, Power Feed Connections & Bolts

Courtesy of CHRYSLER GROUP, LLC

Position the upper PDC component to the PDC base (3) in the engine compartment.
Connect the three bulkhead connectors (2) located in the base of the PDC to the upper PDC component.

Fig 2: Identifying Power Distribution Center, Power Feed Connections & Bolts
Courtesy of CHRYSLER GROUP, LLC
Tighten three bolts (2) through the upper PDC component top until secure. Be sure to not over tighten and crack the base or upper tray.
Connect all power feeds to their PDC posts.
Install the PDC enclosure cover onto the assembled PDC assembly.
Connect the negative battery cable to the negative battery post.