LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Module, Power Inverter >> Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Power Inverter: Installation: Removal

  1. Position the PIM and bracket to the proper position and install using two fasteners.
  2. Connect the electrical connector to the PIM once the PIM has been secured in position by fasteners.
  3. Position the duct into position and snap/secure in place. Refer to DUCT, FLOOR DISTRIBUTION, INSTALLATION .
  4. Connect the battery cable to the negative battery post.
scientia non olet · About LEMON Manuals