Initiate Remote Start
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
To Remote Start the vehicle:
- Press remote button on the Key Fob twice within 5 seconds.NOTE:
Engine will run for 15 minutes after a remote start is initiated. After 15 minutes, the engine will shut off. The system allows for only two sequential remote starts without a key ignition cycle.
- Unlock vehicle with Key Fob to enter the vehicle.
- Put key in ignition, turn key to run position to exit remote start and enter a normal start without engine shut off.