PLUG, Glow: Installation: Installation
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Apply a small amount of clean diesel oil or motor oil to glow plug threads.
- Attach a flexible tool such as a rubber hose to install glow plug into cylinder head. Tighten each plug to 14 N.m (10 ft. lbs.) (124 in. lbs.).
- Connect glow plug wiring harness (2) to all four glow plugs (1).
- Install fuel rail and high-pressure fuel lines.
- Connect negative battery cable.