Standard Procedure - Drain And Fill
WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Remove fill plug (1) and drain plug (2). Drain fluid.
- Install drain plug (2) and tighten to 32 N.m (24 ft.lb.).
- Fill with MOPAR® MS (special tool #9020, Insert, Crankshaft) SAE 80W90 Gear Lube to bottom of fill plug.
- Install fill plug (1) and tighten to 32 N.m (24 ft.lb.).