July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Standard Procedure - Drain And Fill

Fig 1: Drain And Fill Plugs

Courtesy of CHRYSLER GROUP, LLC

If fluid level is low or fluid change is required fill with MOPAR® MS (special tool #9020, Insert, Crankshaft) SAE 80W 90 Gear Lube until to bottom of fill plug.
Tighten fill plug (1) to 32 N.m (24 ft. lbs.).
Tighten drain plug (2) to 32 N.m (24 ft. lbs.).