LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> General Information >> Hoist/Jack >> Vehicle Quick Reference >> Capacities And Recommended Fluids >> Specifications >> Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Capacities And Recommended Fluids: Specifications: Specifications

ENGINE

Description Type Part Number Capacities
U.S. Metric
Cooling System 
(1) Engine Coolant (3.0L Diesel Engines) MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 12.0 Quarts 11.4 Liters
(1) Engine Coolant (3.0L/3.6L Gas Engines) MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 10.4 Quarts 9.9 Liters
(1) Engine Coolant (5.7L Engines without Trailer Tow Package) MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 15.4 Quarts 14.6 Liters
(1) Engine Coolant (5.7L Engines with Trailer Tow Package) MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 16.0 Quarts 15.2 Liters
(1) Engine Coolant (6.4L Engines with Trailer Tow Package) MOPAR® Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 16.0 Quarts 15.5 Liters
Engine Oil with Filter 
Engine Oil (3.0L Diesel Engine) We recommend you use 5W-40 synthetic engine oil such as MOPAR or Shell Rotella that meets FCA Material Standard MS-10902 and the API CJ-4 engine oil category is required. 1 Quart - 68001334PB 8 Quarts 7.7 Liters
(2) Engine Oil (3.0L/3.6L Gas Engine- Domestic/Non-ACEA) API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR, Pennzoil®, and Shell Helix®. 1 Quart - 04761872PA 6 Quarts 5.6 Liters
5 Quarts - 04761851PA
(2) Engine Oil (3.0L/3.6L Gas Engine- ACEA Categories) For countries that use the ACEA European Oil Categories for Service Fill Oils, we recommend you use engine oils meeting the requirements of ACEA C3, and approved to Fiat 9.5535. - 6 Quarts 5.6 Liters
(3) Engine Oil (5.7L Engine - Domestic/Non-ACEA) API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR, Pennzoil®, and Shell Helix®. 1 Quart - 04761872PA 7 Quarts 6.6 Liters
5 Quarts - 04761851PA
(3) Engine Oil (5.7L Engine - ACEA Categories) For countries that use the ACEA European Oil Categories for Service Fill Oils, we recommend you use engine oils meeting the requirements of ACEA C3, and approved to Fiat 9.5535. - 7 Quarts 6.6 Liters
Engine Oil (6.4L Engine) Domestic and Export MOPAR® API Certified SAE Full Synthetic engine oil 0W-40, meeting the requirements of API categories of SM or SM/CF. 1 Quart - 68171066PA 7 Quarts 6.6 Liters
Engine Oil Filter (3.0L Diesel Engine) MOPAR® Engine Oil Filter Kit 68109834AA N/A N/A
Engine Oil Filter (3.0L/3.6L Gas Engine) MOPAR® Engine Oil Filter Kit 68191349AA N/A N/A
Engine Oil Filter (5.7L/6.4L Engine) MOPAR® Engine Oil Filter 04884899AB N/A N/A
Diesel Fuel Filter We recommend you use MOPAR® Fuel Filter. Must meet 3 micron rating. Using a fuel filter that does not meet the manufacturers filtration and water separating requirements can severely impact fuel system life and reliability. 4726067AA N/A N/A
Fuel (approximate) 
Fuel Selection (3.0L Diesel Engine) Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification D-6751 with your diesel engine. This vehicle is compatible with biodiesel blends greater than 5% but no greater than 20% biodiesel meeting ASTM specification D-6751 provided the shortened maintenance intervals are followed as directed. N/A 24.6 Gallons 93.1 Liters
Fuel Selection (3.0L/3.6L Gas Engine) 87 Octane N/A 25 Gallons 94 Liters
Fuel Selection (3.0L/ 3.6L Gas Engine) Flexible Fuel Ethanol E85 (ASTM D5798) N/A 25 Gallons 94 Liters
Fuel Selection (5.7L Engine) 87 Octane Acceptable - 89 Octane Recommended N/A 25 Gallons 94 Liters
Fuel Selection (6.4L Engine) 91 Octane Only or higher N/A 25 Gallons 94 Liters
Diesel Exhaust Fluid MOPAR® Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that has been API Certified to the ISO 22241 standard. Use of fluids not API Certified to ISO 22241 may result in system damage. 1 Gallon - 68035704AB 8 Gallons 30.3 Liters
2.5 Gallon - 68056278AB
55 Gallon Drum - 68035700AB
A/C Refrigerant System 
A/C Refrigerant R-134a 82300101AB 1.375 Pounds 623.7 Grams
(1) System fill capacity includes heater and coolant recovery bottle filled to MAX level.
(2) SAE 5W-30 engine oil approved to Fiat 9.55535 may be used when SAE 5W-20 engine oil is not available. MOPAR® SAE 5W-30 engine oil approved to Chrysler MS-6395 such as Pennzoil® or Shell Helix® may be used when SAE 5W-20 engine oil meeting MS-6395 is not available.
(3) Vehicles equipped with a 5.7L engine must use SAE 5W-20 oil. Failure to do so may result in improper operation of the Fuel Saver Technology.
NOTE:

If the vehicle is exposed to extreme cold (below 20°F or -7°C), or is required to operate at colder-than normal conditions for prolonged periods, use climatized No. 2 diesel fuel or dilute the No. 2 diesel fuel with 50% No. 1 diesel fuel. This will provide better protection from fuel gelling or wax-plugging of the fuel filters.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
SPARK PLUGS

Description Type Part Number Gap
U.S. Metric
Spark Plugs (3.0L/3.6L EHD; ERB Engine) We recommend you use MOPAR® Spark Plugs. SP149125AD 0.043 in 1.10 mm
Spark Plugs (5.7L EZH Engine) We recommend you use MOPAR® Spark Plugs. SP143877AA 0.043 in 1.10 mm
Spark Plugs (6.4L ESG Engine) We recommend you use MOPAR® Spark Plugs. SP149212AC 0.043 in 1.10 mm
TRANSMISSION

Description Type Part Number Capacities
U.S. Metric
Automatic 
HP45 - 8 Speed Mopar ZF 8&9 Speed ATF, Shell L12108 68157995AA 8.98 Quarts 8.5 Liters
HP70 - 8 Speed Mopar ZF 8&9 Speed ATF, Shell L12108 68157995AA 8.77 Quarts 8.3 Liters
NOTE: Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
TRANSFER CASE

Description Type Part Number Capacities
U.S. Metric
MP2010 Use ATF approved to MB 236.10, MB 236.12, such as Shell ATF 3403/M-115, Fuchs/Shell ATF 3353, or equivalent. 1 Quart - 05127382AA 1.1 Pints 0.51 Liters
MP3010 MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 1.4 Quarts 1.35 Liters
1 Gallon - 05013458AA
MP3023 MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 2.0 Quarts 1.9 Liters
1 Gallon - 05013458AA
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
CHASSIS

Description Type Part Number Capacities
U.S. Metric
Axles (Front) 
195FIA FE - Front Axle Mopar® Gear and Axle Lubricant 75W-85 1 Quart - 05136035AA 0.9 Quarts 0.8 Liters
Axles (Rear) 
195RIA - Rear Axle (Aluminum) Mopar® Gear and Axle Lubricant 75W-85 1 Quart - 05136035AA 1.0 Quarts 0.9 Liters
230RIA With ELSD -Rear Axle (Aluminum) Mopar® Gear and Axle Lubricant with Modifier 75W-85 1 Quart - 68083381AA 1.4 Quarts 1.3 Liters
230RIA Without ELSD - Rear Axle (Aluminum) Mopar® Gear and Axle Lubricant 75W-85 1 Quart - 05136035AA 1.2 Quarts 1.1 Liters
Chassis Systems 
(1) Brake Master Cylinder MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
(2) Power Steering Reservoir (Belt Driven Pump)  MOPAR® Power Steering Fluid +4 1 Pint - 05166226AA N/A N/A
Power Steering Reservoir (Electric Pump)  MOPAR® Hydraulic Fluid meeting the requirements of Chrysler Material Standard MS-11655 68088485AA or 05127381AB N/A N/A
(1) If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (04549625AC), is acceptable.
(2) If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (05013457AA), is acceptable.
CAUTION: There is an Electro-Hydraulic Power Steering (EHPS) pump on some vehicles requiring a different fluid. Do not mix power steering fluid types. Damage may result to the power steering pump and system if any other fluid is used. The mechanical power steering pump systems on this vehicle require the use of Power Steering Fluid +4, which meets material specification MS-9602 or equivalent. The EHPS system uses fluid which meets material specification MS-11655 or equivalent. Do not overfill.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
scientia non olet · About LEMON Manuals