LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2015 >> Cherokee Sport, Eng CD ED8, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Instrument Panel Cluster >> Module Programming >> Program The IPC (Instrument Panel Cluster)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Program The IPC (Instrument Panel Cluster)

  1. Connect the scan tool.
  2. Turn the ignition ON to the RUN position (engine not running).
  3. With the scan tool, clear all DTCs.
  4. Turn ignition OFF then ON to the RUN position and confirm DTCs are cleared.
  5. If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to align the PROXI configuration data into the new ECU. Follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under Body Control Module (BCM) Miscellaneous Functions menu.
  6. With the scan tool under RF Hub (RFH), under Miscellaneous Functions menu, "Update Front and Rear Axle Nominal Tire Pressure Values" to program the tire pressure threshold values.
scientia non olet · About LEMON Manuals