Valve, Fuel Quantity Control: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: O-Rings & Fuel Quantity Control Valve

Courtesy of CHRYSLER GROUP, LLC

Install new O-rings (1) onto the fuel quantity control valve (3).

Fig 2: Fuel Quantity Control Valve & Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the fuel quantity control valve (1). Tighten bolts (2) to 7 N.m (62 in. lbs.).

Fig 3: Fuel Quantity Control Valve Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Connect the fuel quantity control valve harness connector (1).
Install the mixing chamber.
Install the engine cover.
Connect the negative battery cable.