LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2015 >> Compass Limited, FWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Boost Pressure: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Mixing Chamber, Harness Connector, Boost Pressure Sensor & Bolts
GC0138080Courtesy of CHRYSLER GROUP, LLC
  1. Install the boost pressure sensor (3) into mixing chamber (1). Tighten bolts (4) to 8 N.m (71 in. lbs.).
  2. Connect the boost pressure sensor (3) harness connector (2).
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals