LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.2L Diesel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.2L Diesel

Fig 1: (ECT) Sensor Wire Harness Connector
GC0162349Courtesy of CHRYSLER GROUP, LLC
  1. Connect the Cooling Temperature (ECT) sensor wire harness connector (1).
    Fig 2: Engine Cooling Temperature (ECT) Sensor & Clip
    GC0162262Courtesy of CHRYSLER GROUP, LLC
  2. Using a NEW  O-ring seal, install the ECT sensor (1) into thermostat housing and push down on spring retainer to lock in place.
  3. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  4. Install the engine cover. Refer to
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals