Clutch Specifications
The B, C, D and E clutch clearance must be measured and properly set during the assembly process of the 948TE/9HP48 transmission. The recommended measurement procedures can be found in STANDARD PROCEDURES .
CLUTCH COMPOSITION
| A - Clutch | Dog Clutch |
| B - Clutch - V6 Gas Engines | 8 Active Surfaces |
| B - Clutch - 4 Cylinder Gas Engines | 6 Active Surfaces |
| C - Clutch - V6 Gas Engines | 3 Discs |
| C - Clutch - 4 Cylinder Gas Engines | 2 Discs |
| D - Clutch | 4 Discs |
| E - Clutch | 5 Discs |
| F - Clutch | Dog Clutch |
CLUTCH CLEARANCE
| All clearance measurements with 3.2 kg/cm2 (45PSI) of force applied to clutches. | |
| B - Clutch - V6 Gas Engines | 1.28 - 1.77 mm (0.050 - 0.070 in) |
| B - Clutch - 4 Cylinder Gas Engines | 1.03 - 1.52 mm (0.040 - 0.060 in) |
| C - Clutch - V6 Gas Engines | 0.76 - 1.15 mm (0.030 - 0.045 in) |
| C - Clutch - 4 Cylinder Gas Engines | 0.51 - 0.90 mm (0.020 - 0.035 in) |
| D - Clutch | 1.1.01 - 1.50 mm (0.040 - 0.059 in) |
| E - Clutch | 1.28 - 1.77 mm (0.050 - 0.070 in) |