LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Cherokee Trailhawk, 2.4L Eng VIN B, Eng CD ED8 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Boost Pressure: Installation

GC0147935Courtesy of CHRYSLER GROUP, LLC
  1. Install the boost pressure sensor (2) securely tighten the bolt (3).
  2. Connect the boost pressure sensor (2) wire harness connector (1).
  3. Install the engine cover. Refer to the appropriate service information article .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals