LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Renegade Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control >> Removal And Installation >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the module with cover into place and tighten the nuts.
  2. Connect the ground cable.
  3. Install the protective cover.
  4. Reposition and secure the side floor cover into the installed position.
  5. Secure the silencer panel.
  6. Install the instrument panel side cover.
  7. Connect the negative battery cable.
  8. Using the diagnostic scan tool, perform the "replacement unit" routine in the misc functions menu of the DTCM.
scientia non olet · About LEMON Manuals