LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Sensor, Accelerator Pedal Position: Installation

GC0085648Courtesy of CHRYSLER GROUP, LLC
NOTE:

The accelerator pedal and APPS (Accelerator Pedal Position Sensor) are serviced as a complete assembly including the bracket.

  1. Install the APPS assembly over two mounting studs and the tighten nuts (2) to 11 N.m (97 in. lbs.).
  2. Connect the APPS wire harness connector (3).
  3. Before starting engine, operate accelerator pedal to check for any binding.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals