October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Sensor, Air Temperature, Intake: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- The sensor mounted O-ring seal (2) can be reused if not damaged.
- Clean the IAT sensor mounting hole in the air inlet hose.
- Install the IAT sensor into the air inlet hose and rotate clockwise until the release tab (3) engages.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the electrical connector (1) to the IAT sensor.
- Install the engine cover. Refer to COVER, ENGINE, INSTALLATION
.
- Connect the negative battery cable.