LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Stabilizer Bar, Front >> Installation >> Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stabilizer Bar, Front: Installation: Switch

GC0148172Courtesy of CHRYSLER GROUP, LLC
  1. Press the switch pod (1) firmly into the instrument panel opening making sure the retaining tabs seat properly.
    GC0148173Courtesy of CHRYSLER GROUP, LLC
  2. Attach the electrical connector (1).
    GC0131421Courtesy of CHRYSLER GROUP, LLC
  3. Install the instrument panel end cap (1).
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals