LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Intake Air Pressure >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Intake Air Pressure: Removal

GC0131128Courtesy of CHRYSLER GROUP, LLC

The Intake Air Pressure Sensor (5) is located on the air cleaner cover (1).

  1. Disconnect the negative battery cable.
  2. Disconnect the Intake Air Pressure (IAP) sensor wire harness connector (4).
  3. Remove fasteners and the IAP sensor.
scientia non olet · About LEMON Manuals