LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Exhaust System) >> Sensor, Differential Pressure >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Differential Pressure: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159583Courtesy of CHRYSLER GROUP, LLC
  1. Install the differential pressure sensor (2) and securely tighten the nut (1).
  2. Connect the differential pressure sensor vacuum hoses (4).
  3. Connect the differential pressure sensor wire harness connector (3).
  4. Install the engine cover. Refer to the appropriate article. .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals