LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Boost Pressure: Removal

  1. Disconnect and isolate the negative battery cable.
    GC0146436Courtesy of CHRYSLER GROUP, LLC
  2. Remove the engine cover (1).
    GC0146601Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the boost pressure sensor wire harness connector (1).
  4. Remove the fastener (3), and the boost pressure sensor (2).
scientia non olet · About LEMON Manuals