LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Center, Power Distribution (PDC) >> Installation >> Installation - PDC Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - PDC Assembly

  1. Position the upper PDC tray to the PDC base in the engine compartment.
  2. Connect the bulkhead connectors located in the base of the PDC to the upper PDC tray bottom.
  3. Secure the PDC tray to the PDC base.
  4. Connect power feeds to their proper PDC posts.
  5. Install the PDC cover onto the PDC assembly.
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals