Sensor, Knock: Removal: 2.4L

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Knock Sensor Location

Courtesy of CHRYSLER GROUP, LLC

The knock sensor bolts into the side of the cylinder block in front of the starter under the intake manifold.

Disconnect and isolate negative battery cable.

Fig 2: 2.4L Knock Sensor
Courtesy of CHRYSLER GROUP, LLC
Disconnect electrical connector (3) from knock sensor (2).
Remove bolt (1) and knock sensor (2) from engine block.