Control Circuit Testing
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - The starter relay is located within the PDC. Refer to DIAGNOSIS AND TESTING .
- Starter Solenoid - Refer to DIAGNOSIS AND TESTING .
- Ignition Switch - Refer to appropriate Ignition Switch and Key Lock Cylinder Service Information.
- Clutch Pedal Position Switch - If equipped with manual transmission, refer to Clutch Pedal Position Switch .
- Park/Neutral Position Switch - If equipped with automatic transmission, refer to Park/Neutral Position Switch in appropriate Transmission Service Information article.
- Wire harnesses and connections - Refer to SYSTEM WIRING DIAGRAMS article.