LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Compass Sport, Eng CD ED6, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

  1. Install the boost pressure sensor and securely tighten the screw.
  2. Connect the boost pressure sensor wire harness connector.
  3. Install the engine cover. Refer to the appropriate Service Information .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals