LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Compass Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Crankshaft Position >> Removal And Installation >> 1.6L Diesel >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

1.6L Diesel: Installation

  1. Install the Crankshaft Position (CKP) sensor and tighten the bolt (1) to the proper specification. Refer to TORQUE SPECIFICATIONS DIESEL  .
  2. Connect the CKP sensor wire harness connector.
  3. Install the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable.
GC0166207Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals