Standard Procedure - Quick-Connect Fittings: Notes
Different types of quick-connect fittings are used to attach the various fuel system components, lines and tubes. Some quick-connect fittings require the use of a special tool for disconnection and removal.
NOTE:
Care must be used when separating fittings. Over-flexing may cause the tube to become deformed or damaged.
These are the quick-connect fittings:
- Redundant Latch Single Button Type Fitting
- Single Button Type Fitting
- Pinch Type Fitting
- Single Tab Type Fitting
- Two Tab Type Fitting
- Plastic Retainer Ring Type Fitting
- Latch Clip Type 1 Fitting
- Latch Clip Type 2 Fitting
- Two Button Type Fitting
- Wing Type Fitting