Relay, Power Control: Installation
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Using two nuts, install the Power Control Relay (2) to the PCR bracket (1).
- Connect and secure the eyelet terminals (1) to the PCR using two nuts (3).
- Connect the wire harness connector (2) to the PCR.
- Inster the PCR cover (1) to the PCR.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.