Sensor, Coolant Temperature: Installation: 3.6L
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Install the Engine Coolant Temperature (ECT) sensor (1) into the thermostat and turn clockwise 1/4 turn to lock in place.
- Verify that the lock tab (1) has properly engaged.
- Connect the wire harness connector to the ECT sensor (1).
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Install the air cleaner body. Refer to INSTALLATION .
- Connect the negative battery cable.