LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 1352 (Speed Control (Service Information)) >> Switch, Speed Control >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. If removed, connect the wire harness connector for the speed control switch.
  2. Position the wire harness in the steering wheel following the correct routing and secure the wire harness in the retainers.
  3. Position the speed control switch to the steering wheel, then install and securely tighten the fastener.
  4. Repeat Steps 1 through 3 for the switches mounted on the left side of the steering wheel.
  5. Install the remote radio switch. Refer to SWITCH, REMOTE RADIO, INSTALLATION .
  6. Install the DAB. Refer to AIR BAG, DRIVER, INSTALLATION .
scientia non olet · About LEMON Manuals