LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Coolant Temperature: Installation

WARNING: This page is about a different car, the 2017 Fiat 500L. However, it is still accessible from the selected car via links, so may be relevant.
GC0152369Courtesy of CHRYSLER GROUP, LLC
  1. Install the engine coolant temperature sensor (4) into the thermostat housing.
  2. Connect the wire harness connector.
    GC0152380Courtesy of CHRYSLER GROUP, LLC
  3. Install the battery (4) and the hold down clamp. Tighten the nut to 55 Nm (40 lbf-ft).
  4. Install the air intake assembly.
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
  6. Connect the positive and negative battery cable.
scientia non olet · About LEMON Manuals