LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2020 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Accelerator Pedal Position: Installation

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0080493Courtesy of CHRYSLER GROUP, LLC
  1. Install the accelerator pedal assembly (3) and securely tighten the fasteners (2).
  2. Connect the accelerator pedal position sensor wiring connector (1).
  3. Install the drivers lower dash board close out panel.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals