LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee High Altitude, Full Time T/Case Control >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seats (Service Information) >> Switch, Lumbar Control >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Switch, Lumbar Control: Installation

GC0187201Courtesy of CHRYSLER GROUP, LLC
  1. Install the lumbar switch (3) to the side shield (1) by engaging it to the switch retainers (2).
  2. Connect the wire harness connector (4).
  3. Install the side shield. Refer to SIDE SHIELDS, SEAT, POWER, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals