LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee Latitude Plus, 4WD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Gear >> Installation >> Notes
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Steering System: Gear: Installation: Notes

NOTE:

Transfer the tie rod ends if they are being reused.

NOTE:

If removed, install the power transfer unit  . Refer to INSTALLATION .

GC0186545Courtesy of CHRYSLER GROUP, LLC
  1. Position the dash seal (2) to the steering gear, then install and tighten the dash seal bolt (1).
    GC0187106Courtesy of CHRYSLER GROUP, LLC
  2. Position the heat shield (2) to the steering gear, then install the steering gear heat shield bolts (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
    GC0177045Courtesy of CHRYSLER GROUP, LLC
  3. Position the steering gear to the crossmember.
  4. Install the steering gear mounting bolts (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  5. Install the front suspension crossmember. Refer to INSTALLATION .
  6. If a NEW  steering gear is installed, the Electric Power Steering (EPS) learn procedure is required. Refer to EPS LEARN PROCEDURE .
scientia non olet · About LEMON Manuals