LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Performance >> 2.4L & 3.2L Ignition System (Service Information) >> Solenoid, Variable Valve Timing >> Removal >> Right
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Solenoid, Variable Valve Timing: Removal: Right

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the resonator. For 2.4L Refer to REMOVAL , or for 3.2L Refer to RESONATOR, AIR CLEANER, REMOVAL .
    GC0144211Courtesy of CHRYSLER GROUP, LLC
  3. Mark the intake VVT solenoid (2) and the exhaust VVT solenoid (4) with a paint pen or equivalent so that they may be installed in their original locations.
  4. Disconnect the wiring harness connector (1) from the VVT solenoid.
  5. Remove the VVT solenoid mounting bolts (3).
    GC0144209Courtesy of CHRYSLER GROUP, LLC
  6. Pull the VVT solenoid from the cylinder head cover.
    NOTE:

    The seal (1) can be reused if it is not damaged.

scientia non olet · About LEMON Manuals