Removal And Installation: Installation
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the block heater sealing surface.
- Install the engine block heater (1) and tighten the bolt (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Connect the power cord plug to the engine block heater (1).
- Install the generator and hand tighten the lower bolt (1).
- Install and hand tighten the two upper generator bolt (1).
- Tighten the upper and lower generator bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Install the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION .
- Install the engine belly pan (Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION ).
- Connect the negative battery cable(s) (Refer to BATTERY, STANDARD PROCEDURE ).