Removal And Installation: Installation
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the wire harness electrical connector (1) to the power outlet receptacle (2).
- Install the power outlet mount ring into the panel.
- Align the splines on the outside of the power outlet receptacle base connector receptacle with the grooves on the inside of the mount ring.
- Press firmly on the power outlet receptacle base (1) until the retaining bosses of the mount ring are fully engaged in their receptacles.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.