LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Grand Cherokee Laredo E, AWD, Full Time T/Case Control >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Knock >> Removal >> 6.4L >> Right Side
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Right Side

  1. Raise and support the vehicle.
  2. Remove the knock sensor heat shield.
    GC0080083Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the knock sensor (1) wire harness connector (5).
  4. Remove the knock sensor retaining bolt (2).
  5. Remove the knock sensor from the cylinder block.
scientia non olet · About LEMON Manuals